How Do I Install White Granite Slabs in My Kitchen

Preparation Work

While granite slabs are usually fixed standard at two centimeters. Suppose the dimensions are (2.5, 1.2) meters. For necessary adjustments and fittings, it is recommended that you have at least 5 centimeters of the slab as edge margin, advised by installation experts to make sure the other placement fits into rooms so seamlessly on both floor-installation options you respectively choose. And over 95% of installation cases demonstrate how the reserved edge margin continues to be an effective prevention against sizing errors.

Slabs are levelled perfectly, to ensure the safety and comfort of use in accordance with a standard set process. Each slab of granite is about 300 to 400 kilograms and, because they need to be moved around in a way that's gentle so as not to damage surfaces during the install process. Between the slab and the countertop is bonded tightly by using 20 to 30 milliliters of silicon sealer. This not only ensures the stability of its structure, but also improves waterproof capabilities. Proper application of sealant can improve the structural strength up to 25%. One of the attributes you need to keep in mind while choosing granite slabs is its compressive strength. Damage rate of granite with high compressive strength is about 40% lower than those in the market, indicating it's more durable.

Laying Techniques

Dedicated, professional techniques are used to create the attractive final result and long-term stability that comes with white granite slabs.

1. Base prep: It is a must to make sure the surface we plan on installing on it lays flat and clean. Check and adjust the level of the ground to error within 0.5 millimetre using a laser level. The land should be dry and tidy entirely free dust or grease, in order to avoid subsequent installation malfunctions.
2. Dry Laying: You will nod need a professional nor competent in remediation, dry laying before actual installation allows you to adjust the slabs' arrangement so you can obtain better transition of color and texture.
3. Gap Control: While laying the slabs, keep uniform (and not too wide) gaps about 1 and 2 millimeters wide.
4. Best Adhesive for Granite Slabs: The adhesive is also a deciding factor in the safe bonding of granite slabs. Adhesives using Epoxy resin have become a favorite among them because of the high adhesive strength and excellent waterproof performance, while chemical resistance is also a notable property.
5. Compression and solidification: After laying, it is necessary to apply proper pressure to make the slabs completely fit together with mutual connection，The following figure of mechanical properties. You may need to gently tap the slabs with a rubber mallet helps them align better and settle.

Installation Process

White granite slabs installation must be done very carefully, following the standard steps to make sure that you could still maximize its beauty and output functionality. Make sure you have all the needed tools and accessories like adhesive, sealant, level spirit suction cup handles rubber hammer. For a 50m2 of granite slabs project, the use of proper tools can decrease working time by about 20% and have less failure chances plus rework. Lay the granite slabs as pre-dry-laid at spots marked. The support structure under each slab be uniform and stable, as having done this has resulted in no movement of any slabs or cracks over a tracking period of up to 6 months.

Fix The Granite Slabs With Your Selected Adhesive: Aqueous or solvent-based polymer has long been used, due to its good adhesive property and mechanical strength. The adhesive, when uniformly applied over the base of these slabs will enhance stability and prevent water seepage. Projects that use epoxy resin adhesive show housing joint failure rates as low as 5% compared to the standard cement mortar rate of around 15%.

When the slabs have been placed, you will want to use a rubber mallet and lightly tap on each slab so it has a chance of fitting into your adhesive properly with no air pockets. Proper tapping method can increase the contact area of slag with adhesive, so as to improve the overall structural stability. Make sure all the joints of slabs are sealed. Correct sealant will help to prevent contaminants and moisture from entering the slab joints. Working with waterproofing increases the water tightness of a structure, not only improving its appearance but also has many advantageous. In one project, thanks to the correct application of sealant, this has managed to cut the occurrence of joint stains and moisture by over 50%.

Finishing and Maintenance

• Cleaning the Work Area Thoroughly after installation: This will provide for the adhesive being removed down to bare materials free of any remaining debris, sealant or construction trash. For example, in a project to install 30 square meters of granite: the whites of neutral detergent soups combined with soft cloth remove surface remains safely and maintaining its original appearance. Some stains and breakage from long-term maintenance can up to 40% reduced with proper cleaning.
• Check Stone and Correct any Defects: As soon as workers are done, you should check the new granite to make sure it appears free of cracks or unsealed spaces. or else when you find a problem fix it up quickly with the paint color to match. To fix small cracks an epoxy resin filler for stones of the same colour can be used. This compound cures within 24 hours and the repair is a visual match with native stone on over 98 percent of brownstone types.
• Protecting by using a Protection Agent: Protect the granite from getting soiled and damage; employ a specialized stone safety agent being an useful maintenance measure. It is generally recommended that people reapply this shield every 2 years to safeguard from the fluid and reduce surface penetration problems by up to variable number of percent.
• Cleaning and Care: Even if white granite is extremely strong, it still needs to be cleaned regularly so that you can continue benefiting from its luster. To facilitate daily maintenance it is advisable to clean with a stone-specific cleaning solution approximately weekly, avoiding strong acidic or alkaline detergents that can erode the surface of the marble. Although it is highly resistant to wear, granite still requires care and sharp knives should never be cut directly on the surface. Direct cutting had a 50% greater likelihood for surface damage on granite and this could be avoided over three-quarters of the time by using an appropriate cutting board.